Data structure for single silicon layer geometry parameters. More...

#include <dataobjects/FitGeoParams.h>

Inheritance diagram for Herd::FitGeoParams:

Classes
struct	PointOnDeadZone

Public Member Functions
	FitGeoParams ()
	Default constructor. More...

	FitGeoParams (RefFrame::Side dside, size_t layerNumber, RefFrame::Direction mainSegm)
	Construct a new FitGeoParams object. More...

virtual	~FitGeoParams ()=default
	Virtual destructor. More...

unsigned int	NSipmPerMat () const
	Get the number of sipms that are attached to a mat. More...

int	NChannelsPerSipm () const
	Get the number of channels in a single SiPM. More...

int	NChannelsPerMat () const
	Get the number of channels that are in a mat. More...

const AxesArray< int > &	NMats () const
	Get the number of ladder that make up a layer. This is intended as number of ladders along each direction. As a convention the number of ladders in the normal plane direction is one. More...

unsigned int	NTotElements () const
	Return the total number of FIT mats. More...

const AxesArray< float > &	MatSize () const
	Get the dimensions of the single mat. More...

float	GetSipmAirGap () const
	Get gap between two consecutive SiPM. More...

Point	ElementPosition (unsigned int elementID) const override
	Get position of a given element. More...

Point	SipmPosition (unsigned int sipmID) const
	Get position of a given SiPM. More...

Point	MatPosition (unsigned int matID) const
	Get position of a given mat. More...

unsigned int	MatID (const Point &position) const
	Retrieves the volume ID of the mat containing the given point. More...

unsigned int	MatIDFromChannelID (unsigned int channelID) const
	Retrieves the volume ID of the mat containing the sipm with the given channelID. More...

unsigned int	SipmIDFromChannelID (unsigned int channelID) const
	Retrieves the ID of the SiPM containing the channel with the given channelID. More...

unsigned int	ElementID (const Point &position) const override
	Utility function to get the element ID from a set of coordinates. More...

unsigned int	SipmIDOnMat (float relativePosition) const
	Returns the sipm ID on mat. More...

unsigned int	ChannelIDOnMat (float relativePosition) const
	Returns the channel ID on mat. More...

float	ChannelPositionOnMat (unsigned int channelIDOnMat) const
	Get position of a given channel relative to the mat "left" edge. More...

void	SetSideAndMainSegmDir (RefFrame::Side dside, RefFrame::Direction segmDir) override
	Set the detector side and the main segmentation direction for fibers. More...

void	SetNSipmPerMat (int nSipms)
	Set the number of sipms per mat. More...

void	SetMatSize (const AxesArray< float > &sizes)
	Set the mat sizes along the three axes. More...

void	SetNMats (AxesArray< int > nMats)
	Set the number of mats along each axis. More...

void	SetMatPosition (size_t matID, Point position)
	Set the mat position for a given mat. More...

Public Member Functions inherited from Herd::TrackingDetectorGeoParams
	TrackingDetectorGeoParams ()
	Default constructor. More...

virtual	~TrackingDetectorGeoParams ()=default
	Virtual destructor. More...

virtual const RefFrame::Side &	Side () const
	Return the detector side this layer is in. More...

virtual size_t	LayerNumber () const
	Return the layer number for this layer in its detector. More...

virtual bool	HasTungsten () const
	Check if layer is preceded by tungsten plane. More...

float	TungstenThickness () const
	Get the tungsten layer thickness. More...

virtual float	ElementPitch () const
	Get element pitch. More...

virtual RefFrame::Direction	NormalDirection () const
	Get the normal direction to the detector. More...

virtual std::pair< RefFrame::Direction, RefFrame::Direction >	SegmentationDirections () const
	Return the segmentation directions of the tracking elements. More...

virtual void	SetHasTungsten (bool value)
	Set the tungsten flag. More...

virtual void	SetTungstenThickness (float value)
	Set the tungsten plane thickness. More...

Protected Attributes
float	_sipmAirGap = 0.009
	Position of all the mats. More...

float	_sipmDieGap = 0.022
	Gap between two consecutive SiPMs. More...

float	_sipmDeadRegion = 0.016
	Gap between two dies in a SiPM. More...

float	_sipmChannelPitch = 0.025
	Dead region at the border of a SiPM. More...

size_t	_sipmDieChannels = 64
	Pitch of a single SiPM channel (250um) More...

size_t	_sipmNDies = 2
	Number of channels in a single die. More...

float	_sipmWidth
	Number of dies in a SiPM. More...

std::vector< std::pair< float, float > >	_sipmRelativePositions
	Width of the SiPM sensor [cm]. More...

Protected Attributes inherited from Herd::TrackingDetectorGeoParams
RefFrame::Side	_side

size_t	_layerNumber
	Detector side. More...

RefFrame::Direction	_normalDir
	Layer number. More...

RefFrame::Direction	_mainSegmDir
	Normal direction. More...

RefFrame::Direction	_secSegmDir
	Main segmentation direction for elements. More...

float	_elementPitch
	Secondary segmentation direction for elements. More...

bool	_hasTungsten
	Element pitch. More...

float	_tungstenThickness
	True if layer is preceded by a tungsten plane. More...

Private Attributes
unsigned int	_nSipmsPerMat

AxesArray< int >	_nMats
	Number of SiPMs in each mat. More...

AxesArray< float >	_matSize
	Number of mats along the three axes. More...

std::vector< Point >	_matPos
	Dimensions of a mat along the three axes. More...

Detailed Description

Data structure for single silicon layer geometry parameters.

Constructor & Destructor Documentation

◆ FitGeoParams() [1/2]

Herd::FitGeoParams::FitGeoParams ( )

Default constructor.

◆ FitGeoParams() [2/2]

Herd::FitGeoParams::FitGeoParams	(	RefFrame::Side	dside,
		size_t	layerNumber,
		RefFrame::Direction	mainSegm
	)

Construct a new FitGeoParams object.

Parameters

dside	The detector side.
stripMainSegm	The main segmentation direction for strips.

◆ ~FitGeoParams()

virtual Herd::FitGeoParams::~FitGeoParams ( )

virtualdefault

Virtual destructor.

Member Function Documentation

◆ ChannelIDOnMat()

unsigned int Herd::FitGeoParams::ChannelIDOnMat ( float relativePosition ) const

Returns the channel ID on mat.

This method computes the relative channel ID on the mat for the given relative position along the segmentation direction. This will return 0 for the first channel of the mat etc. N.B: relativePosition is always w.r.t. the "leftmost" mat edge (mat position - 0.5* mat size) irregardless of wether the channel number increases or decreases with the coordinate.

Parameters

relativePosition The hit position w.r.t. the mat "left" edge.

Returns: The channel ID relative to the mat.

◆ ChannelPositionOnMat()

float Herd::FitGeoParams::ChannelPositionOnMat ( unsigned int channelIDOnMat ) const

Get position of a given channel relative to the mat "left" edge.

Parameters

channelID The relative ID of the channel in the mat.

Returns: the channel position w.r.t. the mat "left" edge.

◆ ElementID()

unsigned int Herd::FitGeoParams::ElementID ( const Point & position ) const

overridevirtual

Utility function to get the element ID from a set of coordinates.

Parameters

position The coordinates of the point (normal coordinate is ignored).

Returns: The ID of the element containing the point.

Exceptions

std::range_error if the given position does not lie on a sipm.

Implements Herd::TrackingDetectorGeoParams.

◆ ElementPosition()

Point Herd::FitGeoParams::ElementPosition ( unsigned int elementID ) const

overridevirtual

Get position of a given element.

Parameters

elementD The unique geometric ID of the element.

Returns: the element position.

Implements Herd::TrackingDetectorGeoParams.

◆ GetSipmAirGap()

float Herd::FitGeoParams::GetSipmAirGap ( ) const

inline

Get gap between two consecutive SiPM.

Returns: the gap.

◆ MatID()

unsigned int Herd::FitGeoParams::MatID ( const Point & position ) const

Retrieves the volume ID of the mat containing the given point.

Parameters

position

Returns: The volumeID of the mat containing the position.

◆ MatIDFromChannelID()

unsigned int Herd::FitGeoParams::MatIDFromChannelID ( unsigned int channelID ) const

Retrieves the volume ID of the mat containing the sipm with the given channelID.

Parameters

channelID

Returns: The volumeID of the mat containing the channel.

◆ MatPosition()

Point Herd::FitGeoParams::MatPosition ( unsigned int matID ) const

inline

Get position of a given mat.

Parameters

matID The unique ID of the mat.

Returns: the mat position.

◆ MatSize()

const AxesArray<float>& Herd::FitGeoParams::MatSize ( ) const

inline

Get the dimensions of the single mat.

Returns: mat dimensions

◆ NChannelsPerMat()

int Herd::FitGeoParams::NChannelsPerMat ( ) const

inline

Get the number of channels that are in a mat.

Returns: number of channels in a mat

◆ NChannelsPerSipm()

int Herd::FitGeoParams::NChannelsPerSipm ( ) const

inline

Get the number of channels in a single SiPM.

Returns: number of channel in a SiPM

◆ NMats()

const AxesArray<int>& Herd::FitGeoParams::NMats ( ) const

inline

Get the number of ladder that make up a layer. This is intended as number of ladders along each direction. As a convention the number of ladders in the normal plane direction is one.

Returns: ladder orientation in the plane

◆ NSipmPerMat()

unsigned int Herd::FitGeoParams::NSipmPerMat ( ) const

inline

Get the number of sipms that are attached to a mat.

Returns: number of sipms in a mat

◆ NTotElements()

unsigned int Herd::FitGeoParams::NTotElements ( ) const

inline

Return the total number of FIT mats.

Returns: the total number of FIT mats.

◆ SetMatPosition()

void Herd::FitGeoParams::SetMatPosition	(	size_t	matID,
		Point	position
	)

inline

Set the mat position for a given mat.

See the wiki page for the mat numbering convention.

Parameters

matID
position

◆ SetMatSize()

void Herd::FitGeoParams::SetMatSize ( const AxesArray< float > & sizes )

Set the mat sizes along the three axes.

Parameters

sizes the size of the mat along each axis [cm].

◆ SetNMats()

void Herd::FitGeoParams::SetNMats ( AxesArray< int > nMats )

Set the number of mats along each axis.

The value for the orthogonal axis must be 1.

Parameters

nLadders The number of mats along each direction

Exceptions

std::runtime_error if the number of mats along the orthogonal direction is not 1.

◆ SetNSipmPerMat()

void Herd::FitGeoParams::SetNSipmPerMat ( int nSipms )

inline

Set the number of sipms per mat.

Must be called after SetSideAndMainSegmDir and SetMatSize. This method computes and sets also the AirGap.

Parameters

nSipms The number of sipms per mat.

Exceptions

std::runtime_error if this method is called before SetSideAndMainSegmDir or SetMatSize.

See also: #FirstSipmPosition

◆ SetSideAndMainSegmDir()

void Herd::FitGeoParams::SetSideAndMainSegmDir	(	RefFrame::Side	dside,
		RefFrame::Direction	segmDir
	)

overridevirtual

Set the detector side and the main segmentation direction for fibers.

Parameters

dside	The side.
segmDir	the main segmentation direction for fibers.

Implements Herd::TrackingDetectorGeoParams.

◆ SipmIDFromChannelID()

unsigned int Herd::FitGeoParams::SipmIDFromChannelID ( unsigned int channelID ) const

Retrieves the ID of the SiPM containing the channel with the given channelID.

Parameters

channelID

Returns: The ID of the SiPM containing the channel.

◆ SipmIDOnMat()

unsigned int Herd::FitGeoParams::SipmIDOnMat ( float relativePosition ) const

Returns the sipm ID on mat.

This method computes the relative sipm ID on the mat for the given position ont he mat itself. This will return 0 for the first sipm of the mat etc. N.B: relativePosition is always w.r.t. the "leftmost" mat edge (mat position - 0.5* mat size) irregardless of wether the channel number increases or decreases with the coordinate.

Parameters

relativePosition The hit position w.r.t. the mat "left" edge.

Returns: The sipm ID relative to the mat.

◆ SipmPosition()

Point Herd::FitGeoParams::SipmPosition ( unsigned int sipmID ) const

Get position of a given SiPM.

Parameters

sipmID The unique ID of the SiPM.

Returns: the SiPM position (middle of the SiPM).

Member Data Documentation

◆ _matPos

std::vector<Point> Herd::FitGeoParams::_matPos

private

Dimensions of a mat along the three axes.

◆ _matSize

AxesArray<float> Herd::FitGeoParams::_matSize

private

Number of mats along the three axes.

◆ _nMats

AxesArray<int> Herd::FitGeoParams::_nMats

private

Number of SiPMs in each mat.

◆ _nSipmsPerMat

unsigned int Herd::FitGeoParams::_nSipmsPerMat

private

◆ _sipmAirGap

float Herd::FitGeoParams::_sipmAirGap = 0.009

protected

Position of all the mats.

◆ _sipmChannelPitch

float Herd::FitGeoParams::_sipmChannelPitch = 0.025

protected

Dead region at the border of a SiPM.

◆ _sipmDeadRegion

float Herd::FitGeoParams::_sipmDeadRegion = 0.016

protected

Gap between two dies in a SiPM.

◆ _sipmDieChannels

size_t Herd::FitGeoParams::_sipmDieChannels = 64

protected

Pitch of a single SiPM channel (250um)

◆ _sipmDieGap

float Herd::FitGeoParams::_sipmDieGap = 0.022

protected

Gap between two consecutive SiPMs.

◆ _sipmNDies

size_t Herd::FitGeoParams::_sipmNDies = 2

protected

Number of channels in a single die.

◆ _sipmRelativePositions

std::vector<std::pair<float, float> > Herd::FitGeoParams::_sipmRelativePositions

protected

Width of the SiPM sensor [cm].

◆ _sipmWidth

float Herd::FitGeoParams::_sipmWidth

protected

Initial value:

=

2 * _sipmDieChannels * _sipmChannelPitch + 2 * _sipmDeadRegion + _sipmDieGap

Number of dies in a SiPM.

The documentation for this class was generated from the following files:

/builds/herd/HerdSoftware/include/analysis/dataobjects/FitGeoParams.h
/builds/herd/HerdSoftware/src/analysis/dataobjects/FitGeoParams.cpp

Classes

Public Member Functions

Protected Attributes

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ FitGeoParams() [1/2]

◆ FitGeoParams() [2/2]

◆ ~FitGeoParams()

Member Function Documentation

◆ ChannelIDOnMat()

◆ ChannelPositionOnMat()

◆ ElementID()

◆ ElementPosition()

◆ GetSipmAirGap()

◆ MatID()

◆ MatIDFromChannelID()

◆ MatPosition()

◆ MatSize()

◆ NChannelsPerMat()

◆ NChannelsPerSipm()

◆ NMats()

◆ NSipmPerMat()

◆ NTotElements()

◆ SetMatPosition()

◆ SetMatSize()

◆ SetNMats()

◆ SetNSipmPerMat()

◆ SetSideAndMainSegmDir()

◆ SipmIDFromChannelID()

◆ SipmIDOnMat()

◆ SipmPosition()

Member Data Documentation

◆ _matPos

◆ _matSize

◆ _nMats

◆ _nSipmsPerMat

◆ _sipmAirGap

◆ _sipmChannelPitch

◆ _sipmDeadRegion

◆ _sipmDieChannels

◆ _sipmDieGap

◆ _sipmNDies

◆ _sipmRelativePositions

◆ _sipmWidth